206 HDI rattle on tickover......HELP!!!!!!!

mrpip · 01-16-2012, 12:21 AM

Can anyone please help, I have a very loud rattle on my W reg, 206 HDI when in tickover. If I press accelerator & take to 1000 rpm, it stops rattling. The car runs great, no noise or loss of power or rattles when running over 1000rpm, . I've had suggestions its the crank pulley but if thats the case would I have the rattle when running

.?? Several years ago I had a car with a simlar rattle & it turned out to be the exhaust heat sheild rattling but I can't see anything that could cause this on the 206. Any ideas....Thanks

danthevan · 01-16-2012, 09:30 AM

Could well be the crank pulley. They're a 2 part setup bonded together with rubber.
Bit hard to diagnose over the internet really!

01-16-2012, 12:21 AM	#1
mrpip Junior Member Join Date: Jan 2012 Posts: 1	206 HDI rattle on tickover......HELP!!!!!!! Can anyone please help, I have a very loud rattle on my W reg, 206 HDI when in tickover. If I press accelerator & take to 1000 rpm, it stops rattling. The car runs great, no noise or loss of power or rattles when running over 1000rpm, . I've had suggestions its the crank pulley but if thats the case would I have the rattle when running.?? Several years ago I had a car with a simlar rattle & it turned out to be the exhaust heat sheild rattling but I can't see anything that could cause this on the 206. Any ideas....Thanks Share Share this post on Digg Del.icio.us Technorati Twitter

01-16-2012, 09:30 AM	#2
danthevan Senior Member Join Date: Nov 2011 Posts: 211	Could well be the crank pulley. They're a 2 part setup bonded together with rubber. Bit hard to diagnose over the internet really! Share Share this post on Digg Del.icio.us Technorati Twitter

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
PeugeotForums.com Advertisement