2002+ 206 Clock Unit Display Problem :S

[one-murb-and-his-pug]

Hi guys,

Back in the forum with a bit of an issue with my central clock display unit (The one that also shows the radio info and what door is open etc.)

I recently fitted a Sony DSX-S300BTX head unit (Birthday present to myself, got Bluetooth and everything), got this working fine however this causes the display of my clock to freeze up - It only shows the time when the auxiliary power was turned on, the little colon flashes to indicate seconds but nothing else changes - I w going to go direct to Peugeot about this but want to see if there are any suggestions on here - Someone's already suggested it might be my ECU?

Let me know if you need any extra info and I'm happy to supply!

[Silver206]

dont no whats up mate, but mine doesnt work at all and iv found out that there a common fault... shame as its about £90 to replace (which i dont have)

[davidireland]

Your aftermarket stereo is messing with the multiplex network. There is a fix, will have to look it up.

[john_h]

you can disable the audio equipment via planet, that could possibly solve the issue.

i fitted a sony mex-bt2600 and it didnt bother my MFD, still managed to display Date, Time, Temp and Trip Info

have you guys installed the autoleads equipment to get the stalk working? pcc99-x44 and pc99-son?

[Silver206]

Originally Posted by john_h

you can disable the audio equipment via planet, that could possibly solve the issue.

i fitted a sony mex-bt2600 and it didnt bother my MFD, still managed to display Date, Time, Temp and Trip Info

have you guys installed the autoleads equipment to get the stalk working? pcc99-x44 and pc99-son?

mine wasnt working when i brought it....done abit of searching and been told that the GLX models the clock/centre console are a common fault (easy to fix if you no how tho...) with me not good with soldering etc etc i have just left it.

Mine doesnt come on at all, no lights no nothing

[john_h]

i've seen you can buy replacements of ebay for as low at £10.

but id check to see if the connector is secure on the back.