Peugeot Forums - View Single Post

Peugeot 406 · 03-11-2007, 10:52 PM

got this info from pug dealer

1. Turn the Ignition switch to the accessory position using the key without the remote plip attached.
2. Hold the Plip key close to the central locking receiver mounted in the roof console.
3. Press the large plip button and then the small plip button on the remote.
4. Turn the ignition OFF.
5. After 5 seconds the Plip should now operate.

03-11-2007, 10:52 PM	#2
Peugeot 406 Junior Member Join Date: Mar 2007 Posts: 5	got this info from pug dealer 1. Turn the Ignition switch to the accessory position using the key without the remote plip attached. 2. Hold the Plip key close to the central locking receiver mounted in the roof console. 3. Press the large plip button and then the small plip button on the remote. 4. Turn the ignition OFF. 5. After 5 seconds the Plip should now operate.